8
9
5)
Once the units are communicating then install the outside unit.
When placing both the inside and outside units remember they are subject to interference.
Try to:-
i)
Install both units as close as possible to each other.
ii)
;Y`HUKH]VPKV\[ZPKLPU[LYMLYLUJLI`UV[WSHJPUN[OLTULHYJVTW\[LYZ;=ZVYHLYPHSZL[J
iii)
(SZVYLTLTILYJVUJYL[L^HSSZÅVVYZJHUPU[LYY\W[[YHUZTPZZPVUZ;Y`HUKH]VPKHZT\JOHZ
possible.
6)
If the connection is successful initially & then fails occasionally, try to reduce the distance
between the 2 units.
7)
To “re-connect”, please hold the “ALARM” button down for 3 seconds, the
Z`TIVS^PSSÅHZOMVYTPU\[LZHUKYLJVUULJ[PVUZOV\SKILHJOPL]LK
Barometer Information
;OLIHYVTL[YPJWYLZZ\YLPZHɈLJ[LKI`MHJ[VYZ
i) The
Local
conditions in the atmosphere. A local storm will create a lower reading for example.
ii) The height you are located above (or below) sea level. The barometric pressure will reduce
by approximately 10 hpa for every 100 metres you go above sea level.
If you are comparing the barometric pressure you are reading against the reading
MYVT[OL4,;VɉJL`V\T\Z[HSSV^MVY[OLSVJHSKPɈLYLUJLZ
The receiver unit allows you to adjust for the altitude you are above or below sea level.
To adjust this hold the
Snooze/Light
button down for 3 seconds. Then adjust the number
(in metres) for your height above (or below) sea level.
Checking Wireless Connection
WS5029 Manual 2020 v4.indd 9
3/9/20 10:17 am
