For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 7
Instructions – 4A822
Transit Connect
Step 1
•
Locate 2 mounting
locations in roof for the
crossbar to be installed.
•
Remove plug
from desired mounting
locations in roof.
Step 2
•
Bolt through the mount foot (B) into the exposed holes in roof using one M8 x 30mm hex
head, one 5/16” flat washer, a rubber spacer, a rubber washer, one 5/16” fender washer,
and one M8 lock nut, in the order shown.
•
Be sure to put a rubber spacer in between mount foot (B) and roof of van as shown below.
•
The roof goes in between rubber spacer and rubber washer.
•
Place sealant between rubber spacer and roof of van and around threads to ensure no water
leaks into van.
•
Repeat for opposite side.
Step 3
•
Go back and tighten all hardware including hardware on the rack itself.