Holman 4A822, Инструкция по эксплуатации, Страница: 4 / 13

For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 3
Instructions – 4A822
Step 1 – Adjustment of Uprights
•
The uprights at each end of the crossbar
come preinstalled.
•
If van upright is not at desired height,
remove bolts and adjust accordingly. Be
sure to have one hole open below where
van upright is bolted to cross member.
•
Repeat on other side of cross member.
•
Insert pin through the van upright and the
cross member, using the open hole below
the previously installed hex bolt.
•
TIGHTEN.
Below shows different heights of van uprights