16
Maintenance & servicing
Maintenance
Problems identified
Possible reasons
Solutions
Electric stove does not heat up.
Power supply cable disconnected.
Check power supply cable connection.
The general power supply is cut.
Check that the switchboard and wall plug
are working.
Stove is overheat protected.
Refer to the electric stove manual.
Sauna light fitting no longer
work.
LED cable not fully plug.
Plug the cable.
LED is defective.
Contact your dealer.
LED doesn’t respond.
Contact your dealer.
Servicing
1. Disconnect your sauna.
2. Use a vacuum cleaner to remove dust from crevices in the woodwork.
3. Clean the cabin with a damp cotton cloth and use a small amount of soap if necessary. Rinse with a damp cloth.
4. Clean the glass with a window / glass cleaner and a soft colth.
IMPORTANT
:
Disconnect the cabin’s power supply cable before undertaking any work.
IMPORTANT
:
Do not use benzene, alcohol, chemical agents or strong detergents on the sauna since chemical products can damage the
wood. Do not spray water on your sauna.
Содержание Venetian hybride
Страница 2: ......
