HOLL'S Hybrid Combi HL-HC04-RS, Руководство по установке

Страница: 30 / 78

81
Maintenance & servicing Warranty
Maintenance
Problems identified Possible reasons Solutions
No indicator light displayed
on the control panel.
Power supply cable disconnected. Check power supply cable connection.
The general power supply is cut.
Check that the switchboard and wall plug
are working.
Fault in power supply unit. Contact your dealer.
One or more infrared panels
do not heat up.
The infrared panel button is
positioned to the middle (
).
Push the button panel to the right or left
according to your desire.
The infrared panel’s cable is
disconnected.
Check cable connections.
One of the infrared panels is
defective. Replace the infrared panel with an original
component supplied by the manufacturer.
Sauna gives off a smell.
Temperature of the panels or their
cables is too high. Switch off power supply and contact your
dealer.
A speaker is not working.
Speaker cable disconnected. Reconnect the cable.
Speaker defective. Contact your dealer.
Screen shows a wrong temperature.
Temperature sensor is incorrectly
connected or defective.
Reconnect the cable or replace the sensor.
Servicing
1. Disconnect your sauna.
2. Use a vacuum cleaner to remove dust from crevices in the woodwork.
3. Clean the cabin with a damp cotton cloth and use a small amount of soap if necessary. Rinse with a damp cloth.
4. Clean the glass with a window / glass cleaner and a soft colth.
5. Please check and fasten the screws of the bench once every three months to prevent the play or fall of the seat.
IMPORTANT :
Disconnect the cabin’s power supply cable before undertaking any work.
IMPORTANT :
Do not use benzene, alcohol, chemical agents or strong detergents on the sauna since chemical products can damage the
wood. Do not spray water on your sauna.