B U L L E T I N # 1 1 9 4 G L V - 4 0 D 1 G E A R L E S S T R A C T I O N M A C H I N E
Page 3-2
Rev. A - 04/01/2022
Hoisting
The machine weighs about 5300 pounds (2410 kg). When removing the machine from the
pallet, it must be lifted using the lifting holes provided at the bottom of the machine.
When lifting the machine, use a spreader beam or other suitable rigging device to pull straight
up on the lifting holes.
WARNING
Use only the lifting holes when lifting the machine! Do not use any other
machine component to lift the machine! Lifting the machine by any other
component will result in damage to the machine or possible failure of the
component resulting in the machine falling from the hoisting system!
Follow all the necessary precautions to avoid damage to the machine or
risk to personnel when moving or hoisting the machine.
Storage
During storage in a warehouse or on the elevator job site, precautions must be taken to protect
the machine from dust, dirt, moisture, metal shavings and temperature extremes.
For short term storage, place the machine in a warm, dry, and clean environment.
Protect the machine from harsh weather conditions and temperature variations that can lead to
condensation.
Protect from dust and metal shavings. Metal dust and shavings can be attracted into the
machine by the magnets.
Figure 2
LIFTING
HOLE
LIFTING
HOLE
Содержание GLV-40D1 Series
Страница 37: ...B U L L E T I N 1 1 9 4 G L V 4 0 D 1 G E A R L E S S T R A C T I O N M A C H I N E Page 8 2 Rev A 04 01 2022 ...
Страница 38: ...B U L L E T I N 1 1 9 4 G L V 4 0 D 1 G E A R L E S S T R A C T I O N M A C H I N E Page 8 3 Rev A 04 01 2022 ...
Страница 39: ...Page 9 1 Rev A 04 01 2022 Notes Section 9 ...
