45
Fig. 68
Fig. 69
Fig. 67
CROTCH STRAP
Take the side of the crotch strap that is not looped; secure a D-Ring with a belt slide leaving about
8 inches (20.3 cm) of webbing between the slide and the end of the webbing. Then weave webbing
through the backplate from the back side (
Fig. 67
). Use the larger slot at the center of the backplate’s
bottom and weave the webbing back through the belt slide
(
Fig. 68
). This is where adjustments to the crotch strap will be made. The looped end will thread onto
the waist strap. When adjusted properly the D-ring should be spaced approximately one hand width
from the backplate, facing the backside, and secured with a belt slide (
Fig. 69
).
