Holley Sniper EFI 550-510, Быстрый старт

Страница: 8 / 12

8
It is now time to begin the Calibration Wizard!
NOTE: DO NOT ATTEMPT TO START THE VEHICLE UNTIL YOU ARE TOLD TO DO SO IN THE INSTRUCTIONS BELOW.
NOTE: The handheld has a SD memory card installed in the side. This card contains specific information that is required for
the use of the Sniper EFI product. DO NOT replace this card with another. There should be no need to remove this
card for normal use.
STEP 1 Select WIZARD from the main menu
STEP 2 Select your Sniper system type
STEP 3 Select the number of cylinders your engine has
STEP 4
Use the slider bar to input the displacement of
your engine
STEP 5
Use the slider bar to set your desired HOT idle
speed. This is the RPM the Sniper will target at
coolant temperatures above 160 °F
STEP 6
Select your camshaft type:

Stock/Mild = This selection will work well on most
applications equipped with stock or “street performance”
camshafts. Choose Stock/Mild If you are unsure of your
camshaft specs

Street/Strip = Select this if your engine has between 8”
and 13” of manifold vacuum

Race = Select this if your engine has less than 7” of
manifold vacuum. Race oriented camshafts may require
laptop tuning for optimal idle stability