Holley Sniper EFI 550-510, Быстрый старт

Страница: 7 / 12

7
13. At this point you are ready to install the battery power and ground cables, these wires must go DIRECTLY to the physical
battery terminals.
Battery connections MUST physically go the battery!
ADDITIONAL INPUTS AND OUTPUTS
The following tables outline the functions of each wire on the Sniper harnesses. For detailed information, please see referenced
sections of the Sniper EFI Reference Manual included with your kit.
7 Pin Connector
Pin Color Labeled Name Function
E Red Battery Positive (+) Connects directly to battery positive terminal
G Black Battery Negative (-) Connects directly to battery negative terminal
C Blue Fuel Pump Output (+) +12v Fuel Pump Supply from Relay
A Violet Crank Signal Positive (+) Engine Speed Signal Input (see Ignition Wring Section)
B Dark Green Crank Signal Negative (-) Engine Speed Signal Ground (see Ignition Wiring section)
D Yellow Coil (-) Input Engine Speed Input (see Ignition Wiring section)
F Pink Switched Ignition (+12v) NOTE: must remain powered during cranking
10 Pin Connector
– 8 wires are populated. This connector contains:
Pin Color Labeled Name Function
A Orange Input #1 (-) Optional - Connect to a ground triggered A/C relay
B Yellow Input #2 (-) Optional - Connect to a programmable ground input
C Light Blue Output #1 (-) Optional
– Connect to Fan #1 relay ground trigger
D Light Green Output #2 (-) Optional
– Connect to Fan #2 relay ground trigger
E Grey Output #6 (-) Optional
– Connect to ground side trigger of A/C shutdown relay
F White Points Output Used to trigger a CD ignition box or the included Coil Driver Module
G Dark Brown Tach Output Used to drive an aftermarket tachometer
H Tan Digital Gauge Output Used to drive Holley EFI analog gauges via 554-130 Gauge Module
I
NITIAL POWER-UP AND WIZARD
Turn the ignition key to the “run” position. This should apply power to the ECU as well as the Sniper EFI Handheld control
module. The handheld should power up and the Home Screen (
figure below ) should appear.
The Home screen contains icons which will navigate to different functional features of the 3.5 Touch Screen. These features will
be discussed in detail throughout the main manual.