Holley 553-112, Быстрый старт

Страница: 12 / 14

12
Integrated LED Light Bar
The 6.86” Pro Dash contains 14 integrated LED lights that can be user programmed for many functions. The
Center 10 LED’s are used for a shift light. The outer four (LED’s A, B, C, D) can be custom configured for
many uses.
10 LED Shift Light Configuration
To access the LED Shiftlight Configuration below, start at the Main Menu and select Configuration>Dash
Configuration>Shift Light>Configure Shift LED’s
The 10 shift LEDs are split up into three groups, each of which can have the color programmed separately
(click the color selection for each) as well as the number for each group (change the numeric value below the
color). The engine RPM at which each segment starts and transitions to the next can be changed by editing
the Min, Warning, Alarm, and Max values. Below the Min value, there won’t be any LEDs active. In the
example above, the first green LED will come on at 4000 RPM, and gradually all three green will be on by
6000. The first yellow Warning LED will come on at 6000, and all yellow will be on by 6500 (with each coming
on in 125 RPM increments in this example). The first red Alarm LED will come on at 6500, with all present by
7000.
The “Main bar alarm mode” indicates what the LEDs will do when the Alarm value is met. The LEDs can
remain solid or they can flash at a slow, medium, or fast rate.
The brightness can be set to “Auto” (will vary based on the ambient light sensor), or the user can set a fixed
value from 1-6.
A
B