HL-190 D25 4WD/P/N / HL-220 D25 4WD/P/N
B-165DL25 4WD/P/N / B-195DL25 4WD/P/N
Rev. A
5/2/18
Page 39
8.2
Overviews
8.2.1
Protective scissor skirt
The protective scissor skirt on the bottom carriage prevents body parts from becoming trapped by
the moving scissor arms.
8.2.2
Lubrication points
EP NLGI-kl.2 + Teflon
(< 2 % drying agent) must be applied to the lubrication points at least once a
month.
Diesel engine
Check the oil level. If necessary, top it up.
Every day
Other: follow the instructions given on the maintenance
sticker on the diesel engine.
See the sticker
Battery
Check the liquid level. If necessary, top it up.
Every week
Recharge the battery if the scissor lift has not been
used for more than 2 weeks.
Every two weeks
when not in use.
Proximity switches
Height stops
Check the operation and the setting.
Every week
Tilt safety device
Make sure it works correctly.
Every day
Wheels
Tighten the wheel bolts according to the tightening
torque overview.
Once every
3 months
Do not rest the wheels on the ground if the scissor lift
is not going to be used for a long period of time.
-
PLC operation
Replace the battery. Only do so if the PLC is
connected to a power supply, because the program
will then be saved in the memory.
Every 4 years
Overload safety device
Make sure the scissor cannot lift more than the
specified work load.
Once a month
Easylube
Check the quantity in the reservoir.
If necessary, top it up.
Once a month
Automatic lubrication
system
Check the quantity in the reservoir.
If necessary, top it up.
Once a month
Note!
If the scissor skirt is removed during maintenance work, then it must be put back correctly once
the maintenance work has been completed.
It is not permitted to use the scissor lift if the protective scissor skirt has not been fitted or if it
does not work as intended.
Component
Action
Frequency
