background image

Lowes.com

6

PRINTED IN CHINA

Holiday Living & Design

®

 is a registered 

trademark of LF, LLC. All rights reserved.

Burned fuse

FUSE REPLACEMENT INSTRUCTIONS:

1. Grasp plug and remove from the receptacle or other outlet device. 

    Do not unplug by pulling on cord.
2. Open fuse cover by sliding open the fuse access cover on top of 
    attachment 

3. Remove fuse carefully: turn fuse holder over, remove fuse.

5. Close fuse cover by sliding closed the fuse access cover on top of 

    attachment plug.

FUSED LAMP REPLACEMENT

WARNING -

 Risk of fire: This product employs overload protection (fuse lamp) in 

each series light circuit to provide overload protection in addition to the fuse(s) 
located in the plug. Do not replace the fuse lamp contained in this set with any 
other type of lamp, use only spare fuse lamps provided with this product. In case 
of a burnt out FUSED lamp, the entire series of 50 lamps will be out. To replace 
the fused lamp:
1. Grasp the plug and remove from the receptacle or other outlet device. Do not 

unplug by pulling the cord.

2. Locate the fused lamp with gray color lamp holder. Pull the burnt fused lamp 

and plastic lamp base straight out of the lamp holder.

3. Replace with a spare fused lamp. The fused lamp can be distinguished by a 

gray lamp base and an additional clear plastic cover.

4. Plug in the lights again.

REPLACEMENT PARTS LIST

Fuse

Bulb

B

A

For replacement parts, call our customer service department at 

1-888-919-0070

, 8 a.m. - 5 p.m., EST, 

Monday - Friday.

A

B

Fuse

Bulb

C

Fuse Lamp

T

N

PAR

DESCRIPTIO

Fuse Lamp

C

TROUBLESHOOTING

 

 

 

Bulb broke.

1. Start with the first unlit bulb, then gently push (don't twist)

    each bulb firmly into the socket.

2. Look and feel for a broken bulb in the socket or an 

    empty socket where a bulb has fallen out. 

 

    Mark the bulb with a piece of tape and unplug the tree

    before removing the bulb socket and any fragments.

    Replace the broken bulb.

Replace any burned out bulbs.

One bulb will not light.

A section will

not light.

Bulb is broken.

1. Bulb is loose.

2. Bulb broke or

    fell out.

Bulb burned out.

PROBLEM         POSSIBLE CAUSE                              CORRECTIVE ACTION

Содержание TG90P3813S03







Отзывы: