Lowes.com
5. Remove protective cap from tree middle section 3 (4). Insert tree
middle section 3 (4) into tree middle section 2 (3).
6. Insert tree top (5) into the top hole of the tree middle section 3 (4).
5
• Unplug extension cord from the wall outlet first and then remove all ornaments and decorations.
• Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to
remove from section below and fold all branches toward the pole.
• Continue by gently lifting straight up each section(s) from the section below
and fold all branches toward the pole until the bottom section is removed from
the tree stand. Cover the protective cap on the poles to avoid damaging the
internal parts.
(See Fig. A)
• Carefully place all tree sections into shipping box and tape it shut.
• When not in use, please store your tree in a cool, dry place away from sunlight.
Exposing your tree to excessive heat or humidity may damage your tree.
CARE AND MAINTENANCE
Grip plastic
not glass
Pull straight out
Remove lamp base Replace lamp base
1. Grasp plug and remove from the receptacle or other outlet device.
Do not unplug by pulling on cord.
out of lamp holder.
BULB REPLACEMENT INSTRUCTIONS:
5
7
8
7
1
6
2
3
4
5
6
7
3
6
6
7 8
7 8
4
7
5
4
7. This tree does not require shaping.
Plug in the power cord (5) to any 120V outlet. Press the pedal
switch (6) to turn on the tree lights.
Fig. A