ASSEMBLY INSTRUCTIONS
2. Remove bubble wrap and cord from the tree bottom (1).
Shape the branches of the tree bottom (1). Note: Side
branches should be pulled out to form the shape of a "Y."
3. Remove the protective cap from the tree middle (2). Insert the
tree middle (2) into the tree bottom (1). Remove the bubble
wrap and cord from the tree middle (2) to allow the
branches to unfold into place.
4.
Connect the light set plug from the tree bottom (1) into the
extension cord outlet on the tree middle (2). Note: You MUST
match the color code on the plug to the color code on the
extension cord outlets.
5. Plug the extension cord assembly into the power supply. Both
sections of the tree should be lit now. If some bulbs do not
light, search for any loose plugs or broken/missing bulbs.
Shape the branches of the tree middle (2). Note: Keep the
tree plugged in while shaping the branches; should a light
flicker while doing this, check the bulb(s) that may have
caused the trouble.
Side
branches
2
Side view
3
2
1
5
4
5
Lowes.com
2
1
5
1
2
5
