HMPRO36AD OPERATOR’S MANUAL
www.holemaker.com
3
CONTENTS
1. GENERAL INFORMATION
3
1.1. Application
3
1.2. Technical data
3
1.3. Equipment included
4
1.4. Dimensions
5
1.5. Design
5
2. SAFETY PRECAUTIONS
6
3. STARTUP AND OPERATION
7
3.1. Installing and removing the handle
7
3.2. Installing, removing, and operating the annular cutter
8
3.3. Preparing
10
3.4. Drilling
12
3.5. Replacing the motor brushes
13
4. WIRING DIAGRAM
15
PRO 36 AD
1. GENERAL INFORMATION
1.1. Application
The
PRO
36
AD
is
a
drilling
machine
with
electromagnetic
base, designed to drill
holes with
diameters
of
up
to
36
mm
(1-7/16’’)
either
to
a
depth
of
up
to
20
mm
(13/16’’) by using
HSS
annular
cutters
or
to
a
depth
of
up
to
30
mm
(1-3/16’’)
by
using
TCT
annular cutters. When
using
twist
drill
bits
with
a
19
mm (3/4’’)
Weldon
shank
you
can
drill
holes
with
diameters of up to 12 mm (1/2’’) to a depth of up to 20 mm
(13/16’’).
The electromagnetic base
allows the drilling machine to be fixed to ferromagnetic
surfaces
with
a force that ensures operator safety and proper machine operation.
A safety strap protects the machine from falling in case of a power loss.
With
an
optional HSS
quill
assembly
you
can
drill
holes
to
a
depth
of
up
to 25 mm
(1’’) by using HSS cutters or twist drill bits with a 19 mm Weldon shank.
1.2. Technical data
Voltage
1~ 110–120 V, 50–60 Hz
1~ 220–240 V, 50–60 Hz
Total power
1000 W
Motor power
920 W
Tool holder
19 mm (3/4’’) Weldon
Maximum drilling diameter with annular cutter
36 mm (1-7/16’’)
Maximum drilling diameter with twist drill bit
12 mm (1/2’’)
Maximum drilling depth with HSS cutter or drill bit
20 mm (13/16’’)*
Maximum drilling depth with TCT cutter
30 mm (1-3/16’’)
Electromagnetic base holding force
(surface with the thickness of 25 mm and roughness
R
a
= 1.25)
8 900 N
Electromagnetic base dimensions
90 mm × 180 mm × 38.5 mm
3-9/16’’ × 7-1/16’’ × 1-1/2’’
Stroke
39 mm (1-1/2’’)
Rotational speed without load
550 rpm (for 115 V)
580 rpm (for 230 V)
Rotational speed under load
350 rpm (for 115 V)
370 rpm (for 230 V)
Minimum workpiece thickness
6 mm (1/4’’)
Protection class
I
Noise level
More than 85 dB
Required ambient temperature
0–40°C (32–104°F)
Weight
9.5 kg (21 lbs)
* Up to 25 mm (1’’) when used with an optional HSS quill assembly (ZSP-0521-04-00-00-0).
This document is protected by copyrights.
Copying, using, or distributing without permission of PROMOTECH is prohibited.
3
