
Black plate (54,1)
Holden Volt Owner Manual (Holden-Localizing-Holden-7337564) - 2014 -
CRC - 11/8/13
10-54
Vehicle Care
16. If the flat tyre was able to
inflate to the recommended
inflation pressure, remove the
maximum speed label from the
sealant canister (5) and place it
in a highly visible location.
Do not exceed the speed on
this label until the damaged
tyre is repaired or replaced.
17. Return the equipment to its
original storage location in the
vehicle.
18. Immediately drive the vehicle
8 km to distribute the sealant in
the tyre.
19. Stop at a safe location and
check the tyre pressure. Refer
to Steps 1
–
11 under
“
Using the
Tyre Sealant and Compressor
Kit without Sealant to Inflate a
Tyre (Not Punctured).
”
If the tyre pressure has fallen
more than 68 kPa (10 psi)
below the recommended
inflation pressure, stop driving
the vehicle. The tyre is too
severely damaged and the tyre
sealant cannot seal the tyre.
If the tyre pressure has not
dropped more than 68 kPa
(10 psi) from the recommended
inflation pressure, inflate the
tyre to the recommended
inflation pressure.
20. Wipe off any sealant from the
wheel, tyre, and vehicle.
21. Dispose of the used sealant
canister (5) and sealant/air
hose (6) assembly at a local
dealer or in accordance with
local regulations and practices.
22. Replace it with a new canister
available from your dealer.
23. After temporarily sealing a tyre
using the tyre sealant and
compressor kit, take the
vehicle to an authorised dealer
within 160 km of driving to
have the tyre repaired or
replaced.
Using the Tyre Sealant and
Compressor Kit without
Sealant to Inflate a Tyre (Not
Punctured)
To use the air compressor to inflate
a tyre with air only and not sealant: