Holars AS H-TAG, Руководство пользователя

Страница: 7 / 15

6
Attention :
Install a 1N4004 or equivalent diode is needed when use a common power supply, or the keypad
might be damaged.(1N4004 is included in the packing)
Programming
Programming will vary depending on access confirguration. Follow the instructions according to
your access configuration.
Notes:

User ID number : Assign a user ID to the access card / PIN in order to track it. The common
user ID number can be any number fom 0~597, the panic user ID is from 598~599.
IMPORTANT: User IDs do not have to be proceeded with any leading zeros. Recording of
User ID is critical. Modifications to the user require the User ID be available.

Proximity Card : Any 125KHz industry standard 26 bits HID and EM cards and 13.56MHz
mifare card

PIN: Can be any 4~6 digits except 8888 which is reserved.
Add Common Users
Programming Step Keystroke Combination
1. Enter Program Mode
* (Master Code) #
Add Card User
2. Add Card: Using Auto ID
(Allows H-TAG to assign Card to next
available User ID number)
OR
2. Add Card: Select Specific ID
(Allows Master to define a specific
User ID to associate the card to)
OR
2. Add Card: by Card Number
OR
2. Add Card: Block Enrolment
(Allows Master to add up to 598 cards
to the Reader in a single step)
Takes 2 minutes to program.
1 (Read Card) #
The cards can be added continuously.
1 (User ID) # (Read Card) #
(User ID is any number from 0-597)
1 (Input 8/10 digits Card number) #
1 ( User ID) # (Card quantity) # (The
first card number) #
Card
s’ number must be consecutive;
Card quantity = number of cards to be
enrolled.
Add PIN User
2. Add PIN: Using Auto ID
(Allows H-TAG to assign PIN to next
available User ID number)
1 (PIN ) #
The PINs can be added continuously.
(PIN: 4~6 digits)
2. Add PIN: Select Specific ID
(Allows manager to define a specific
User ID to associate the PIN to)
1 (User ID) # (PIN ) #
The user ID is any number from 0-597
3. Exit *