Hohner Maschinenbau GmbH – ORION 4
- 11 -
8.
Pressure adjustment for clincher back pressure
The clincher back pressure can be adjusted, it depends on the stitching thickness and
the kind of paper. First loosen clamp levers
1
on the right and left side of the
machine, then loosen the clamp lever
2
and adjust the clincher back pressure with the
adjusting lever
3
.
After the pressure adjustment tighten again clamp lever
2
and both clamp levers
1 .
If an individual pressure adjustment is required, please revert to page 7.
