Step #5: Locate the main power harness that came with your amplifier
and plug it into the amp. The amplifier will now slide into the fairing
“power end” first with the chrome badge in the upright position. The
amp will be in the correct position when the holes on the amp’s plate
match up with the holes in the fairing shown by the white circles shown
below. The holes in the circles are where the headlight assembly bolts
back in. The “power end” of the amplifier plate rests on the main inner
fairing structural bracket. You will see the amp can really only go in one
way.
Step #6: Its now time to wire the amp into your bike. Refer to the NCA
450-RM Amplifier manual for wiring starting at “Option 2” on page 3.
Radio
Amplifier Sits Here
Headlight Bolts
NOTE: It’s a good idea to use the factory headlamp assembly bolts
to hold the amp in place while you are wiring the amp and
ready to reinstall the headlamp/outer fairing.
Harley-Davidson and Road Glide are Trademarks, and/or Registered Trademarks of Harley-Davidson, Inc.,
and if Used or Implied are for Reference Only. There is No Affiliation Between
Harley-Davidson, Inc., and Hogtunes Inc.
