background image

  

WARRANTY INFORMATION

Hogtunes speakers are warranted for a period of 20 years to the original pur-
chaser. Hogtunes Amplifiers are warranted for 1 year from original purchase date. 
Proof of purchase is required for all warranty claims. All Warranty claims must 
be made through the dealer this product was originally purchased from. Speak-
ers found to be defective during the warranty period will be repaired or replaced 
(with a product deemed to be equivalent) at Hogtunes sole discretion. Amplifiers 
will be repaired.

What Is Not Covered:

 

1) Any expense related to the removal or re-installation of Hogtunes products.

 

2) Repairs to these products performed by anyone other than Hogtunes.

 

3) Subsequent damage to any other components.

 

4) Any product purchased from a non-authorized Hogtunes dealer.

 

5) Damage to Hogtunes products due to an accident or collision.

 

6) Hogtunes Amplifiers with broken or removed “warranty void” stickers.

TECHNICAL SPECIFICATIONS

Hogtunes NCA-70.2 Amplifier

 

 

 

Rated Power at 2 Ohms:  

70 Watts/Channel (@1% THD)

 

 

 

Actual Power at 2 Ohms:  

77 Watts/Channel (@1% THD)

 

 

 

Actual Power at 4 Ohms:  

> 50 Watts/Channel (@1% THD)

 

 

 

Efficiency:  

>66%

 

 

 

Fuse:  

15 amp

Harley-Davidson, Electra Glide, Road Glide, Street Glide, Ultra Classic, Tri Glide, CVO, 
Screamin Eagle and Tour-Pak® are Trademarks, and/or Registered Trademarks of Harley-
Davidson, Inc., Milwaukee, Wisconsin, USA, and if Used or Implied are for Reference Only. 
There is No Affiliation Between Harley-Davidson, Inc., and Hogtunes Inc.

Harman Kardon® is a Registered Trademark of Harmon International Industries Inc., and is 
Used for Reference Only. There is No Affiliation Between Harman 
International Industries Inc. and Hogtunes Inc.

23

NOTE:

 If you are not using Hogtunes speakers, please BE SURE the speakers you 

are using will take the power of this amplifier! Many speaker companies feel they 
can sell more product by greatly exaggerating their advertised power handling 
vs. their ACTUAL power handling. Hogtunes does not accept any responsibility for 
speakers other than ours when NCA 70.2 is installed.

Hogtunes products will play much louder than the

Original Equipment, which can be a distraction to

the rider and/or passenger. Please use caution

when adjusting, or playing your stereo

at high volume, especially in traffic.

You are a valued customer so please:

Ride Alert

Arrive Alive!

www.hogtunes.com

Содержание NCA70.2













Отзывы: