background image

  SYSTEM UPGRADE #2 

 

This system has the incredible power of 2 - NCA 70.2 to your bike! The first amp 
will run the fairing speakers, and HF-1 or HF2-RG Tweeter Pod (if present). The 
second amplifier is used to power a set of rear speakers, or speakers in your Ultra 
Classic style fairing lower glove boxes.

21

Use supplied blue plug send 

signal from expansion port of first 

amp to input of second amp

Optional 

HF-1/HF-2RG 

Tweeter Pod

 

  SYSTEM UPGRADE #3 

 

This system uses a Hogtunes NCA-40.4 160 watt 4 channel amp and a NCA 
70.2 for the ultimate in power! As shown below, the typical system would have 2 
channels of the NCA 40.4 power the fairing speakers, while the other 2 channels 
power the rear speakers. The bypass out of NCA 40.4 is used to send music to 
the NCA 70.2 which powers the fairing lower speakers. The beauty of this system 
is that all plugs that go the speakers are the same. If you decide you would like 
more amplifier power to your rear speakers, by simply moving a couple of plugs 
around, you can apply the higher power amp to which ever speakers you like to 
custom “tune” the system for your requirements.

22

Use supplied blue plug send 

signal from expansion port of first 

amp to input of second amp

Optional 

HF-1/HF-2RG 

Tweeter Pod

Содержание NCA70.2













Отзывы: