Hoggi SUPRA 2.0, Инструкция по эксплуатации

Страница: 20 / 41

20
6.4 Back height
SUPRA 2.0 is equipped either with an adaptable backrest covering or
with a back plate.
The basic backrest heights are 20/25/30/35 cm.
Adjustable backrest covering
Back panel
The fastening is done via clamps to the back frame.
By loosening the screw connections, the height of the back plate can be
adjusted.
A different backrest height can also be achieved by moving the screws
into other slotted holes.
To obtain a corresponding adjustment range, telescopic tubes for
back height adjustment or single push handles must be additionally
equipped. These offer 10 cm length (back height 20 cm only 5 cm
possible for constructional reasons.)
This results in the following adjustment range:
Telescopic tubes
Single push handles
Height adjustment by loosening the screw on the back frame.
- 20 up to 25 cm
- 25 up to 35 cm
- 30 up to 40 cm
- 35 up to 45 cm