Hoggi SUPRA 2.0, Инструкция по эксплуатации

Страница: 18 / 41

18
Loosen the screw connection to the axle mount and remove the screws
completely. Then remove the camber adapters and pull the axle out of
the holder.
On the opposite side, also align the rear axle frame in the new position
and screw it in place.
Put the clamp back on the rear axle frame with the alignment to the front.
Insert the axle and screw the camber adapters tight again. The exact
alignment towards the ground must be checked with a spirit level.
Important, regardless of whether the alignment is to the front or
rear, the rear axle frame must always be mounted as shown with
the narrow side facing outwards!
Outside Inside