16
4) While the self-centring working spindle is rotating, extract the hook through the dedicated control (
5
)
[fig. 7]. The
hook will lift the tire bead over the rim [fig. 8].
Rotate the self-centring spindle till the
mounting/demounting operation is completed.
Fig. 7
Fig. 8
Keep hands and body away from the wheel while the self-centring spindle is rotating in order to avoid
accidental injuries
3) In case the machine is equipped with the
Press-System
device,
it is possible to help the extractor hook positioning, pressing the tire
bead with the roller [fig. 5].
• Start the self-centring working table rotation by foot control (
4
).
• Pull down the extractor hook through the control (
5
)
[fig. 5] and
[fig. 6].
NOTE!
When the operation has been completed, keep the roller
away from the working area (if used).
Fig. 5
Fig. 6
17
5) Pull down the extractor hook again through the control
6) Lift the tire manually, up to the lower bead is over
the hook.
7) Pushing up the control lever, release the hook: the tire
bead will be lifted over the rim edge
19
Содержание Megamount Twister EVO CP
