Hofmann Megaplan Manual megaline SSENCE
SSENCE 400/600
Page 7 of 13
1.1.4 Install the cabinet.
Unpack the cabinet and clean it. Install the support brackets for the four clamps with targets on the cabinet.
Support bracket installation
Brackets on cabinet
Unpack Computer, keyboard, and mouse and install everything in the
cabinet. Please take care of the correct connection !
The plugs are marked with little stickers. Follow the scheme you will see
picture on the right side.(also on PC) It shows the correct connections.
URGENT!! If you have more machines:
Be absolutely sure that you use the right
Computer. The calibration of the camera
bar is stored on the hard disk. If you use the
wrong computer you will get problems
while installation. Computer and bar must
be from the same serial number.
Install and arrange outer power source; and ensure that the voltage is stable and circuit is safe.