5. Automatic mode
This parameter determines if the device starts
the therapy automatically as soon as you put
on the mask.
To program the automatic mode go th the
Patient menu (hold down the
for approx. 1
second) and then select the desired setting
with the help of the
button.
If »OFF« is programmed you have to switch the
device on and off by pressing the operating
button.
If the automaic is set to »ON« you simply have
to put on the mask and breathe normally. The
device will then start the therapy automatically.
If you want to end the therapy simply take off
the mask. After 5 seconds the device will
switch off automatically.
In the automatic mode, the device is turned off
if the mask or the tubing slip off unnoticed
during the night.
Therefore the device offers you the function
»Automatic OFF« with mask alarm. Then you
have to switch on the device in the evening and
switch it off in the morning by pressing the
operation button (ON/OFF) but you also receive
an acoustic warning in case of a leakage.
Pressing the ON/OFF button will not end the
therapy. You only get the message to take off
the mask.
27
VECTOR et
CPAP
13
CPAP
CPAP
CPAP
CPAP