Before operating the device, please pay attention to the
following:
1. Never switch on the device if it has recently
been in a very cold environment. Wait
approximately one hour for temperature
compensation.
2. Check the filter cassette at regular intervals and
change it regular (see pages 17, 26). Never use
the device without filter cassette.
3. Clean the mask system regularly, and check the
accessory especially the therapeutic tube, mask
and fixing straps. We recommend to wash the
face before going to bed as skin oils and
cosmetic should be removed.
Thus, the life-span of the mask will be increased
and skin irritations can be avoided.
4. Verify that the measuring tube (smaller tube) is
correctly attached, open and free of moisture or
obstructions. If water enters this tube during
cleaning, take special care to remove it.
Please pay attention to the following
advices for setting up:
1. Never place the device near a heater
or radiator. Make sure the air circulation especially
under and behind the device is not hindered by
furniture, curtains or pillows.
2. Place the device beside your bed on a firm and even
surface such as a nightstand or bedside table.
3. During mobile operation the device is also to
be placed on an even and firm surface which
should have a border preventing from falling down.
10
Respiration Therapy Device
TREND 300
Hints to be observed before starting
Содержание Trend 300
Страница 1: ...USER S MANUAL TREND 300 TREND 300 ...
Страница 31: ...31 Respiration Therapy Device TREND 300 Notes ...