manualshive.com logo in svg

Hoffmann Megaplan Megaspin, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
Hoffmann Megaplan Megaspin Скачать руководство пользователя страница 83

83

Ver. 04-2015

Use and Maintenance Manual

ENGLISH

Err. 21
Err. 22

Date and time setting error

1.  Repeat the date and time setting function
2.  Check that you have set numbers compatible with the date and 

time format

Err. 31/
Err. 32/
Err. 33/
Err. 34/
Err. 39/
Err. 42

Firmware upgrade management error

1. 

Check that you have loaded a file with extension BI5

2. 

Repeat the firmware upgrade function

Err.50

Error in eccentricity measurement 

using the external laser

1.  Check that you have correctly mounted the wheel or rim
2.  Check that during measurement (wheel at full speed), the red light of 

the external laser is aimed at the tyre or the rim

3.  Open the spindle, close the spindle and repeat the eccentricity 

measurement function

Err.51

Error in eccentricity measurement 
using the internal laser

1.  Check that you have correctly mounted the wheel or rim
2.  Check that during measurement (wheel at full speed), the red light of 

the internal laser is aimed at the tyre or the rim

3.  Open the spindle, close the spindle and repeat the eccentricity 

measurement function

Err.60

Error: the spindle is not closing

1.  Use the self-diagnostics function to check proper functioning of the 

spindle

Err.61

Error: the spindle is not opening

1.  Check the pneumatic system air pressure
2.  Check the spindle opening/closing control microswitch
3.  Check that there are no mechanical obstructions hindering spindle 

opening/closing

Err.70

Error. Lift down and does not ascend

1.  Use the self-diagnostics function to check proper functioning of the lift
2.  Check proper functioning of the microswitch that detects the lift in 

rest position

3.  Check the pneumatic system air pressure

Err.71

Error. Lift up and does not descend

1.  Use the self-diagnostics function to check proper functioning of the lift
2.  Check proper functioning of the microswitch that detects the lift in 

rest position

3.  Check that there are no mechanical obstructions hindering lift descent

Err.72

Error. Lift up during unbalance, 
eccentricity and taper measurement

1.   Lower the lift before starting any measuring cycle

Err.75

Error in the taper calibration function

1.  Use the self-diagnostics function to check proper functioning of the 

external laser

2. 

Check that the external laser light spot is aligned with the spindle

3.  Check that you have correctly fitted the calibration tool
4.  Repeat the taper calibration function

Err.100

Error in sending parameters from the 
PC to the acquisition board

1.  Reset the wheel balancing machine

If the problem persists:

1.  Check the connection cables between the PC and the acquisition board
2.  Replace the acquisition board
3.  Replace the PC

Err. 120

Stepper motor initialisation error

1.  Check functioning of the stepper motor
2.  Check functioning of the encoder on the stepper motor slide
3.  Check that there are no mechanical obstructions hindering laser
   movement
4.  Check the stepper motor power supply
5.  Contact Technical Service

Err. 121
Err. 123/124
Err. 125/126
Err. 127/128
Err. 129/130

Internal laser motor control error

1.  Reset the wheel balancing machine

If the problem persists:

1.  Check compatibility between the software and the firmware
2.  Reinstall the software and the firmware

Err. 141
Err. 143/144
Err. 145/146
Err. 147/148
Err. 149/150

External laser motor control error

1.  Reset the wheel balancing machine

If the problem persists:

1.  Check compatibility between the software and the firmware
2.  Reinstall the software and the firmware

Diagnostics

Содержание Megaplan Megaspin

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды