Hoffer Flow Controls Integrated Cryogenic Electronics HP-319, Быстрый старт

Страница: 14 / 43

HP-319 8 ICE Quick Start Guide
Turbine Calibration Mode
The Turbine Calibration Mode screen is used to configure all parameters
related to the turbine flowmeter calibration. Touching any gray button on
the display will bring up the edit screen for that field.
Turbine Calibration Mode Screen
Menu Item Selection Description
Meter SN
Numeric Entry Enter the turbine serial number.
Valid entry is a number up to a 9-
digits between 0 and 999999999.
Average K
Numeric Entry Enter a number between 0.001 and
99999.999 for the average k-factor.
K Method
Average
Linearization Select flowmeter linearization
method as Average (single K) or
Linearization (5-point linearization
table)
Numeric Entry of
5 frequency and
k-factor points. Enter the 5-point k-factor table.
Frequency 1-5 Frequency points 1-5 must be a
number between 0.100 and
5000.001 and must be at least
0.015 greater than the previous
frequency entry.
K-Factor
Table
K-factor 1-5 K-factor points 1-5 must be a
number between 0.001 and
99999.999.
Last Cal
Numeric Entry Enter the date of the last
calibration in the format
mm/dd/yyyy
Turbine Calibration Mode
Min Flow (gpm): 15.0
Max Flow (gpm): 225.0
Min Delivery (lb): 220.0
Meter SN: 123456789
Average K: 200.000
K Method: Average
K-factor Table
Last Cal: 12/22/2011
Next Cal: 12/22/2012
Meter Size (inch): 2.00
ICE SN: 123456789