3
31
7.2
VACUUM CLEANER DISASSEMBLY
1. To disassemble the vacuum cleaner components, perform the assembly
steps in reverse order, pressing the relevant assembly buttons.
2. To disconnect the dust container from the battery base, press the assembly
button firmly, then separate the components.
Caution!
During assembly and disassembly, make sure you do not incidentally
switch the vacuum cleaner on by pressing one of the two “on/off” buttons.
7.3 CHARGING
1. Make sure that the device is turned off.
2. Insert the plug into the charging socket, then leave to charge.
Connect the charger mains plug to the power outlet. A charging indicator light
is located on the battery. The battery symbol has three LEDs, which flash alter
-
nately in white as the battery is being charged. Another LED is under the battery
symbol. When it is continuously shining white, it means the device is connected
for charging.
The device is fully charged when all the LEDs are continuously lit in white.
Disconnect the plug from the charging socket.
The charging time is approx. 4.5 h. Operation time:
• At low suction power: approx. 30 min
• At the highest suction power: approx. 20 min
Caution!
Do not put the used batteries in a rubbish bin, but in special containers for spent
single-use and rechargeable batteries.
Never expose the battery to direct heat sources, such as excessive sunlight,
heaters or fire.