HOFFEN MS-9449, Инструкция по эксплуатации

Страница: 30 / 34

3
30
for this. Rinse under running water or use
the cleaning brush.
Caution! Make sure the water temperature
does not exceed 40
o
C.
• Leave to dry completely.
• When the item is dry, reinstall it on the
device, put the cap on it (if the head has the relevant cap), and store the device
in a safe place.
Caution! Cleaning the shaver head with the cleaning brush. Use the shorter
tip, and move forward and back so the bristles penetrate the spaces between
the blades.
FACE BRUSH CLEANING
• Switch off the device.
• Disconnect the face brush. See point
7.4 Head installation/removal.
• Clean thoroughly using running water with soap.
• Dry the face brush with a towel, leave to dry completely.
When the face brush is thoroughly dry, put the protective cap on it.
TRIMMER
• Switch off the device.
• Disconnect the trimmer. See point
7.4 Head installation/removal.
• Clean thoroughly under running water.
• Dry the trimmer with a towel, leave to dry completely.
For optimum shaving performance, it is recommended to change the shaver
head and the face brush every two years.
The manufacturer does not guarantee its availability on the market.
OILING
Attention! Only the head of hair clippers and trimmer
needs lubrication. Depending on the frequency of use,
it is recommended to lubricate the device from time to
time.
1. Make sure that the device is turned off.
2. Apply a few drops of preservative oil to the blades of the
hair clipper and trimmer.
3. Turn the device on for a few seconds, turn it off and then turn it on and off again.