3
23
7.3
BRUSH REPLACEMENT
1. Make sure that the appliance is switched off.
2. Press the attachment lock release button while turning the attachment to the
right.
3. To install the attachment, place it on the housing, press the attachment lock
release button and turn it to the left.
7.4
USING THE STRAIGHTENING BRUSH
1. Make sure that the voltage in the electrical power socket matches the parameters
listed in this user manual.
2. Plug the appliance into the power supply socket.
3. Turn on the appliance and select the blowing intensity.
Warning!
Do not touch and do not put your hands on the air blow outlets! Risk
of burns.
4. The light indicator will lighten up.
5. To straighten your hair, place a lock of hair no shorter than the width of the brush
between the brush’s heated bristles. Then move the brush down the length of
your hair without stopping (max. 5 seconds) to prevent overheating.
6. Repeat this step until the rest of your hair is straight.
Step 2: Turn
Step 1: Press
Step 1: Press
Step 2: Put it on and turn
