3
31
5. Wait for some time (ca. 10 - 15 minutes) until the
device reaches its operating temperature.
6. Move the curling clip slide button, then put the end of
a strand of combed hair into the clip.
7. Release the curling clip button to lock the hair.
8. Wind the strand onto the heating element by rotating
the device. To make it easier to wind strands of hair
onto the ceramic heating element spiral, grasp the
main handle of the device with one hand. With the
fingers of the other hand placed on the front handle,
slowly twist the curler. The hair strand should lie on
the surface of the spiral ceramic heating element.
9. Wait for several seconds. Next, move the curling clip
slide button to release the end of the hair strand and
remove the hair from the spiral.
10. When styling your hair, you can adjust the curl diameter
(there are two diameters available). To choose the
desired curl diameter, follow the guidelines in section
7.2 item 2.
WARNING!
When the device is hot, be careful when
switching from the maximum diameter (open position)
to the minimum diameter (closed position). Grasp the
main handle firmly with one hand. With the fingers of
your other hand, press the front handle until the spiral
modelling guide moves to the closed position.
11. To turn the device off, press the ON/OFF button.
12. Disconnect the device from the power source.
13. Put the device on a heat-resistant surface and, after it
