HOFFEN HBS-9264, Инструкция по эксплуатации

Страница: 26 / 31

3
26
household vessel.
• Connect the device to the 220-240 V~, 50 Hz AC mains.
• Put the whisk into the container or other vessel.
• Press and hold the slow or high speed (TURBO) button. It is recommended that
you start with the slow speed button.
• Disconnect the device from the power source after use.
• Twist off the whisk to remove it.
7.5 Operation with the 600 ml chopper
In this configuration, the blender is intended for chopping such products as meat,
cheese, onion, herbs, garlic, walnuts, almonds, plums etc. Do
not chop hard products such as nutmeg, coffee beans or cereal
grains.
• Make sure that the device is disconnected from the power
source.
• Put the chopper blades on the spindle in the 600 ml chopper
container. Place the chopper container on a flat, dry and stable
surface.
• Put the food products into the chopper container (up to 2/3 of
the container height).
• Place the lid on the chopper container and gently twist it shut.
Caution! The edges of the chopper container and the lid are
specially shaped. Do not apply force to connect the two items. If
you feel resistance, twist the chopper container at a slight angle. Do not use if the
lid is not correctly installed.
• Connect the chopper container lid with the blender so that the notches in the
container lid align with the lid disassembly buttons, then twist it on.
• Connect the device to the 220-240 V~, 50/60 Hz AC mains.
• Press and hold the slow or high speed button. It is recommended that you start
with the slow speed mode.
• During operation, hold the chopper container with one hand and the blender
with the other hand.
• Disconnect the device from the power source after use.
• Remove the blender from the chopper container lid by twisting it off.
• Take the lid off the chopper container.
• Carefully take out the chopper blades.