HOFFEN GS-9145, Инструкция по эксплуатации

Страница: 32 / 38

3
32
Ironing
a) Clothes and upholstery
1. Remove the attachment from the device, see 7.4 Attachment installation/
removal.
2. Connect the device to the mains grounded socket.
3. Wait for the device to be ready for operation – the green light indicator will stop
flashing and light up continuously.
4. To release steam, press and hold the steam release button. If you do not want
to keep pressing the steam release button, lock it by pressing it and sliding its
moving part down.
5. Apply the device to the clothes and slide slowly up and down, ironing out the
creases.
ATTENTION! For ironing thick fabrics, coats and upholstery, use the bristle
brush attachment.
ATTENTION! Install the attachment when the device has cooled down and is
disconnected from the power grid socket, see 7.4 Attachment installation/
removal.
b) Animal hair removal
1. Use the device as when ironing clothes, item a) clothes and upholstery, in
accordance with points 1-4, just instead install the attachment with bristle
brush for removing dirt such as animal hair.
2. Slowly move the brush from left to right on the surface from which you are
removing e.g. animal hair.
ATTENTION! Install the attachment when the device has cooled down and is
disconnected from the power grid socket, see 7.4 Attachment installation/
removal.
Problems Solution
The device does
not heat
• Make sure it is connected to a power grid socket.
• Check the power cord for damage.
• Check if the device is switched on – the icon should
be illuminated.
The device does
not generate
steam
• Check the water level and the tightness of the water
filler plug.
• Check the position of the hose – should be under
the water surface. If necessary, gently shake the
device to change the position of the hose.
• Check the steam release button – make sure it is
working correctly.
• Check if the device is working by holding it vertically.