HOFFEN FP-9063, Инструкция по эксплуатации

Страница: 31 / 38

3
31
Caution! Gently push the products down using the pusher.
Caution! Match the product size to the diameter of the opening in the bowl lid.
Caution! Add new products slowly.
7.7 Work with juice squeezer
1. Repeat steps 1-3 from section 7.3 Work with blending blades .
2. Place the squeezer screen with the cone in the bowl on the
drive extension. Twist the squeezer screen clockwise until the
tab in the screen enters into the notch in the bowl handle and
locks into place. A characteristic click will be heard.
3. Wash all the citrus fruit, slice them into halves, and squeeze on
the squeezer cone.
4. For disassembly, perform the installation steps in reverse
order.
Caution! It is recommended to use mode 1 (low speed) to
squeeze citrus fruit.
Caution! When squeezing, the juice may splash around.
7.8 Work with the blender
1. Place the device body on a flat and stable surface.
2. Put the blender jug onto the body, so that the tabs in the body
engage with the tabs in the blender jug, and twist clockwise.
The jug handle should be located on the right side of the body,
when looking from the front at the on/off switch with the speed
adjustment.
3. Put the products into the jug.
4. Put the jug lid and plug into place.
5. Start blending.
6. For disassembly, perform the installation steps in reverse order.
Caution! Before the actual blending, select the pulsating mode to initially blend
the products.
Caution! Prior to operation, make sure the blades are properly installed.
Caution! You may use the measuring cup to add ingredients during operation.