EN
[56]
DEHUMIDIFIER
for a long time, remove the plug from the power supply and empty the
drainage tank (G).
Empty the drainage tank
•
As soon as the drainage tank (G) is full, the full tank indicator (L) lights
up and a warning sound of 15 consecutive beeps sounds to alert the
user that it is necessary to empty the tank (G).
•
Remove the tank (G) by gently pulling it with both hands through the
side recesses (fig. 2) and pour all the water (fig. 3). During this process
the full tank indicator (L) lights up red and flashes until the tank (G) is
replaced in the main body of the appliance.
•
Re-assemble the tank (G) (fig. 4) to resume operation. If the tank (G)
is not properly fitted, the full tank indicator (L) is activated and the
appliance does not work.
Note:
Do not remove the float (F) from the drainage tank (G) (Fig. 5). If
the float is removed, the full tank sensor will not be able to detect the
water level correctly and water may leak from the tank (G).
Continuous drainage
•
This appliance can be used in continuous drainage mode. For this
purpose, a PVC hose with an inner diameter of 10 mm (accessory
supplied with the appliance) must be used.
Fig. 2
Fig. 3
Fig. 5
Fig. 4
