HOFFEN ACNY-H008, Инструкция по эксплуатации

Страница: 26 / 32

EN
[26]
CONVECTOR HEATER
Operation
• Make sure that the appliance is turned off on the button (D) before
connecting it to the power supply.
• Unclip the power cord completely and plug the appliance into the outlet.
• Turn the thermostat button (F) clockwise to maximum position, the light
(E) turns on, and it will go off when the thermostat button is turned to the
off position.
• Switch the appliance on the button (D) by selecting the required heating
level:
h
Medium heating level - turn button (D) to position “I”;
h
Maximum heating level - turn button (D) to position “II”.
• As soon as the ideal room temperature is reached, turn the thermostat
button(F) slowly counter clockwise until the thermostat is heard to click
off and the light (E) goes out. This way the appliance will keep the room
temperature automatically.
• For continuous heating, ie without maintaining the automatic room
temperature by the thermostat, turn the thermostat button (F) to its
maximum position.
• To turn the appliance off, turn button (D) to the off position “0” and also
turn the thermostat button (F) counter clockwise to the off position.
• If you want to move the appliance, or if you do not want to use it for a long
period of time, remove the plug from the power supply.
HINTS
• Keep doors and windows of the room you want to heat closed and make
sure they are well caulked, to minimize the heating loss.
• Place the appliance near the walls facing onto the outside of the house
(colder walls) and preferably, under a window in order to benefit from air
circulation, allowing a better distribution of hot air and a more efficient use.
TROUBLESHOOTING
During use, if any irregularities are detected on the appliance’s operation, check
the below table to understand the causes and solutions. If it is not possible to
detect the cause, please go to the store where the appliance was bought or