HOFFEN 214/18, Инструкция по эксплуатации

Страница: 22 / 27

22
USER MANUAL
1. Place the device on a stable surface such as a kitchen counter and connect it to the
power supply. Open the lid by pressing the cover release buttons on both sides of the
device as shown in the illustration below
2. Pass the foil from the back of the device under the cover and foil cutter so that it
protrudes a few cm behind the vacuum seal on the opposite side to the heating bar.
3. Close the lid and press in place marked by the hand symbol to lock. Audible clicks
mean that the device has been blocked
4. Press the „weld” button to weld the foil tip. The button light will come on and go out
automatically after welding.
5. After the indicator light turns off, press the cover release buttons on both sides
of the device to open it. Then move the desired amount of film from the roll and cut it
with a cutter.
6. Put a portion of food, remembering to leave at least 6 cm unfilled bag to the
welded edge.
7. Place the unheated end on the lower vacuum seal as shown in the illustration below