HOFFEN 202109, Руководство пользователя

Страница: 23 / 24

EN © 2022 HOFFEN. All rights reserved. Sonic toothbrush
23
10. TROUBLE SHOOTING
In case of any problems with the device, please refer to the following tips.
The brush does
not switch on
Check that the battery is charged.
Perhaps the service life of the battery is over - contact the
manufacturer's service department.
Vibrations are too
delicate
Check that you are not pressing the brush against the teeth
too hard.
Check whether the brush tip or brush housing are damaged.
Check that the tip is not accidentally too firmly seated on the
brush's pin, which may hinder its movement.
Despite the
toothbrush has
been placed in a
charging base, the
brush does not
charge.
Check that the cable or plug coming out of the charging base
is not damaged.
Check if the charging base is correctly connected to the
power supply.
Perhaps the service life of the battery is over - contact the
manufacturer's service department.
The gums bleed
after using the
toothbrush.
Check that you do not press the tip too hard against your
gums.
Check that you do not press the tip against your gums at a
bad angle.
During the first dozen or so uses of the gums may bleed slightly
(not very frequent phenomenon) or you may feel discomfort (a
frequent phenomenon among people who have not used
mechanical toothbrushes so far). This usually happens when the
gums are not used to the new washing technique and the amount
of brush vibrations. If, after 2 weeks of using the toothbrush in
the recommended way gums still bleed, stop using the device and
consult a specialist dentist.
If the problem persists, contact the manufacturer's service department.
STORAGE OF EQUIPMENT
If you are not going to use the device for a long time, after disconnecting the
charging base from the power source, cleaning and drying its components, store it
in a dry room away from heat and moisture sources. It is best to place the device in
its original packaging, away from children and pets.
TRANSPORT OF THE DEVICE
It is recommended to transport the device in its original packaging. Do not expose
the unit to excessive vibration or shock during transportation. During operation, only
move the unit when it has been disconnected from the power supply. Do not expose
the device to high temperatures or moisture.
11. STORAGE AND TRANSPORT