HOFFEN
EN
24
HOFFEN
8. USE
BEFORE THE FIRST START
All operations should be carried out gently so as not to damage the
components.
Perform all operations carefully, paying particular attention to the risk
of UV-C radiation exposure of the skin, eyes of humans and animals, as well
as damage to surfaces not resistant to UV-C radiation.
Make sure the dust container and the filter is correctly mounted
and fully pressed into place.
Unpack the device. Check if any of the components are not damaged.
Check whether all components of the unit has been correctly
assembled. Unlock the power cord and insert the plug into the power
outlet.
USING THE VACUUM CLEANER
The device is equipped with a protection against accidentally
switching on the UV lamp.
For the lamp to switch on, both rollers with
pressure sensors must be pushed into the housing.
The device is equipped with a UV lamp, the radiation of which can have
a bad influence on the vacuumed surfaces. If you are not sure whether the
surface to be cleaned is resistant to UV radiation, test the device on a hidden
area.
UV lamp works only if both pressure sensors rolls are pushed in and
the device is laid flat. Lifting it up will turn off the UV lamp.
To start vacuuming, place the bottom of the vacuum cleaner on the
surface to be cleaned. Make sure that there are no people (including
children) or animals that could look at the surface. Press the power
button.
