HOESCH SensePerience 68986.101401, Планирование, установка и инструкции по эксплуатации

Страница: 16 / 40

16
GB
■ take the cap off, unscrew the bolt and pull out the knob
■ install the knob in a way that the panel is in the same place as 38°C temperature mark in the knob
■ screw the bolt and put the cap
In order to remain entitled to repairs under
the guarantee and to keep the shower panel
looking good, you should do the following:
remove sediment and impurities regularly
from the screen.
04.03 Steam Generator Cleaning
The cleaning process is performed automatically after the steam bath and indicated by the ` - ´ symbol fl ashing in display [W1]. The
steam generator is emptied, fi lled and emptied again. The cleaning process takes 5.2 minutes. The steam function is blocked during the
cleaning process.
04.04 Steam Generator Decalci fi cation
⚠
Don't open the fi lling door while enjoying a steam bath. For your safety we
recomment to wait at least 30 minutes after using a steam bath till the cabine
cools off.
[W1] + [W2] flash
- the steam generator has been operating for 18 working hours, the system needs to be
decalci
fi ed!
Symbol „00“ flashes in display [W1]
- the steam generator has been operating for 20 working hours and the steam function is
blocked. The system needs to be decalcified
For decalci fi cation, pour in 250ml of the liquid decalci fi er (i. e. HOESCH special softening
agent Art.Nr. 692101) and activate the process by keeping button 5 pressed for 10 seconds.
The decalci
fi cation process can not be interrupted and is indicated by the symbol „00“ appers in display [W1].
Decalci fi cation process duration = 65 minutes
04.05 Fragrance dosage
Aromatic essences may only be added to the tank located on the steam nozzle.
Since scent extracts available in stores contain alcohol, only HOESCH scent extracts may
be used.
We will reject any claims on warranty if other scent extracts are used.
⚠
Be careful about direct skin contact near the steam outlet.
This can cause scalding!
05 Proper use of steam function!
First you take a shower and then use the steam bath. Before any steam bath, you should
take a shower, remove traces of soap and carefully wipe the whole body.
After getting the required temperature: enter the steam cabin and close the door carefully.
Please, avoid direct skin contact with the area of the steam outlet.
15 minutes is enough!
First time use the steam bath only as long as you feel comfortable. We recommend maximum 15 minutes at 40
to 50°C. The best is taking a steam bath in the sitting position.
Steam bath duration should be controlled. You should never use more than 2-3 cycles of steam bath sequentially.
Steam is fragrant. The invigorating fragrances increase the refreshing effect and pleasure of the Roman steam bath. To increase the
steam bath effect, HOESCH fragrances can be added directly to the steam jet tank.
Alternating shower. At the end of each steam bath: cold shower. It has a refreshing effect. If you take warm shower, you will be relaxed
and muscle tension will reduce.
Relax. The best way is to lay down and relax this way relaxation effect and pro fi table steam bath effect for your body will be
strengthened.
Steam bath relaxes. The biggest advantage of steam bath is user friendly temperature from 40-50 °C and perfect combination of heat
and humidity.
Using the steam bath for children requires constant adult supervision.
Particular caution is advised when elderly and disabled person uses the steam bath.
22
250ml