HOCHIKI DFG-60E WATERPROOF HEAT DETECTOR
INSTALLATION INSTRUCTIONS
General Description
The DFG-60E detector is designed for areas that are exposed to water, and provides reliable heat detection
with a slow or fast change in temperature. It is particularly suited to environments that are exposed to high
levels of condensation or are hosed down and has a wide operating margin allowing it to respond to both
slow and fast increases in temperature. It can also sense temperature reliably in a horizontal or vertical
position.
The detector is supplied with a set of flying leads for direct connection to the conventional zone and remote
LED (if required) and does NOT require any form of standard detector base.
WIRING
The wiring of the DFG-
60E waterproof heat
detector should be made
as shown right:
Mounting
If a back box is required then the DFG-60E can be mounted using the MK Red Alert surface mounting
range, for example the YCR/502.
Specifications
Ordering code
DFG-60E
Operating Voltage
15 - 30Vdc (Nominal rating 24Vdc)
Standby current
Zero
Current in alarm state
50mA at 24Vdc
Ambient temperature range
-10
°
C to +60
°
C
Storage temperature range
-30
°
C to +70
°
C
IP Rating
IP67
Fixing centres
70mm
Colour and case material
Ivory - modified polycarbonate
Weight 80g
