Getting to know the device
3
Introduction to the remote controller
The blue indicator that is close to
the blockage flashes.
Blockage is detected.
The blue indicators no. 1, 3, 4, and 6
flash 3 times.
5mm glass is detected.
The green indicator is on.
Self-test is failed.
The green indicator flashes.
The temperature of the motor is too
high. The higher the temperature, the
faster the indicator flashes.
All of the blue indicators flash one
after another counterclockwise.
The device is cooling.
All of the indicators light up.
The device is having a risk of falling.
The green and red indicators are on,
the blue indicators no. 4, 5, 6 are on.
Magnetic attraction is too weak during
the cleaning process.
The green and red indicators are on,
the blue indicators no. 1, 2, 3 are on.
Magnetic attraction is too strong during
the cleaning process.
Indicators
Meaning
Remote controller
Button Function / Mode
Button
Function / Mode
Auto Up then Down
Speed mode: Slow
Auto Left then Down
Speed mode: Normal
Auto Right then
Down
Speed mode: Fast
Manual Up
No use
Manual Down
-
Press
then
to
turn off/on 6pcs IR
sensors (Turn Off if
sunlight is very strong or
pastes/sticker is on the
window that interfere
WINBOT movement.)
DO NOT turn off for
frameless window.
Manual Left
Manual Right
,
Stop
Please remove insulation spacer in the bottom of back of remote controller before using it. If
you want to change the battery, just pull down the battery cover.
