Hobot HOBOT-2S, Руководство пользователя

Страница: 13 / 16

- 11 -
◎
LED Indication
Status LED Indication Audio Alert Situation and Handling
Charging
Orange light on X UPS charging
Green light on X UPS fully charged
Operating
Blue and white light
flashing Two beeps with
voice prompt
Low UPS battery. Please refer to FAQ Q1
for resolution.
Red and blue light
flashing
Long sound
alert with voice
prompt
Power supply disrupted. Please
reconnect HOBOT to a power source.
Please refer to FAQ Q2 in case of power
outage or inaccessibility of power source.
Blue light on O Spray function on
White light on O Spray function off
White light flash once X Water spraying
Blue/White light on
One long and
two short
beeps with
voice prompt
Cleaning completed
Light is off One beep Air leakage. HOBOT will reverse.
Blue light flashing
Two beeps with
voice prompt
Please refer to FAQ Q3 for resolution.
White light flashing
Air leakage. Please refer to FAQ Q7 for
resolution. If the leakage still exists,
please contact a local retailer or an
authorized dealer for repairment.
Red light flashing
Hardware failure. Please contact a local
retailer or an authorized dealer for
repairment.
◎
Frequently Asked Questions (FAQ)
1.
Charging UPS battery.
Store HOBOT in a dry and safe place if you won’t be using it for an extended
period of time. Charge the battery every 3 months to preserve battery life. If the
battery cannot be fully charged (green light on) after 3 to 4 hours, please contact
a local retailer or an authorized dealer for battery replacement.
2.
HOBOT stops working due to power outage with red and blue light
flashing and audio alert on.
If HOBOT is in an accessible area:
(1) Hold the safety rope with one hand and grasp HOBOT tightly with the other
hand to remove it from the glass/surface.
(2) Switch off the power when HOBOT is in a safe area.
(3) Check if the power cord is damaged or broken.
If HOBOT is not in an accessible area:
The safety rope can be used to pull HOBOT back. Gently pull the safety rope
while keeping the rope close to the glass/surface to avoid HOBOT from falling
off. Repeat the above (1)-(3) steps once HOBOT is within reach.
---HOBOT---