14 EN
Floor cleaner:
Fixing/removing the cloth
(images C1, C2)
1.
Position the floor brush (1) in the middle
of the cloth.
2. Press the cord clip together and simulta-
neously lash the cover to the cord (see im-
age C1).
3. To remove the cloth, loosen the cord clip.
4. To clean carpets, put the appliance onto
the carpet coasters (see image C2).
Removing/inserting the
hand-held steam cleaner
(images D1, D2)
Removing
1. Press the release lever (7) and remove the
hand-held steam cleaner (11) from the main
body (13).
2. To simplify cleaning with the hand-held
steam cleaner, you can fix the carrying strap
(22) to the handle of the hand-held steam
cleaner and the extension hose (see image
D2).
Inserting
1. Insert the lower end of the hand-held
steam cleaner (11) into the main body (13)
and subsequently push the upper end until it
audibly snaps in.
Hand-held steam cleaner:
attaching accessories
(images F1-F7)
Attaching/removing the adapter
1. Remove the hand-held steam cleaner
(11) from the main body (13).
2. Align the guide on the hand-held steam
cleaner and the recess on the adapter with
each other.
3. Push the adapter into the hand-held
steam cleaner until it snaps in (in the same
way as the extension hose as illustrated in
image F1).
4. To remove the adapter, press the release
lever on the bottom of the adapter and pull
the adapter from the hand-held steam clean-
er (see image F2).
Attaching/removing the extension hose
1. Remove the hand-held steam cleaner
(11) from the main body (13).
2. Align the guide on the hand-held steam
cleaner and the recess on the extension hose
with each other.
3. Push the extension hose onto the hand-
held cleaner until it snaps in (see image F1).
4. To remove the extension hose, press the
release lever on the underneath of the exten-
sion hose and pull the extension hose off the
hand-held steam cleaner (see image F3).
Attaching the additional nozzle (see im-
age F4)
1. Attach the desired nozzle (18, 19, 20, 23,
24) to the adapter or the extension hose and
turn the nozzle clockwise to lock it.
2. The nozzle can be removed again by
turning anti-clockwise and pulling.
NOTE
►
The fabric brush (23) can also be used
with the microfibre cloth (see image F7).
Mount the window attachment and the
table brush attachment (see images F5
and F6)
1.
Attach the fabric brush without microfibre
cloth.
2. To attach the window attachment (16) or
the table brush attachment (17), hook the
fabric brush (23) into the attachment and fold
down until it snaps in.
3.
Fix the corresponding microfibre cloth to
the table brush (17).
4. To remove, release the locking tab and
remove the attachment.
Operating
Instructions
General
Before beginning with cleaning, read the
instructions on caring for the material to be
cleaned.
Use an unexposed area to check for toler-
ance of the material against steam.
