19
EN
Assembly
PLEASE NOTE!
•
Switch off the device before a nozzle is replaced.
Inserting / Detaching the Suction Hose
•
Plug the connection piece of the suction hose into the suction opening on the dust container.
It must engage audibly (
see Picture A
).
•
To detach the suction hose, press the two locking lugs on the connection piece and pull out
the suction hose.
Inserting / Detaching the Telescopic Tube
•
Plug the handle into the appropriate opening of the telescopic tube. Twist the handle back and
forth slightly as you do this. Then check the connection to make sure there is a secure
fi
t (
see
Picture B
).
•
To detach the telescopic tube, pull it away from the handle.
Adjusting the Length of the Telescopic Tube
•
Push the slider (
A
) on the telescopic tube downwards and pull the telescopic tube out to the
length you want (
see Picture C
).
•
Release the slider and move the telescopic tube a little bit more until it engages.
Attaching / Detaching Nozzles
•
Plug the free end of the telescopic tube as far as it will go into one of the nozzles supplied.
Twist the nozzle back and forth slightly as you do this.
•
For greater
fl
exibility, the nozzles can also be plugged directly onto the handle of the suction
hose, without the telescopic tube.
•
To detach a nozzle, pull it off.
