HobbyPCB RS-HFIQ Enclosure Kit, Инструкция по сборке

Страница: 2 / 8

1. Inventory
The kit is supplied with the following components:
Quantity Description
1 Front Panel PCB
1 Rear Panel PCB
1 Power switch cable assembly with 2-pin header (not used)
1 Power Switch
4 Stick-on feet
4 Lite-pipes
8 #6-32 X ¼” machine screw
1 Extruded case (not shown)
1 Extruded cover (not shown)
There are also a few items that you will need for assembly which are not included with the kit:
•
#1 Philips Screwdriver
•
Black marker
•
Ruler
•
Soldering Iron, solder
•
Wire cutter/stripper
•
Long-nosed pliers
•
RS-HFIQ transceiver board