Hobby FIAT Premium Drive Скачать руководство пользователя страница 61

Страница: 61 / 203

Interior Structure

06-11

The stowage cabinets under the alcove bed should only be

loaded lightly. The more weight stowed in these cabinets,

the harder it is for the alcove bed motor to run.

Please also note the manufacturer's separately enclosed

operating instructions.

• The maximum load for the alcove berth is approx. 200 kg.

• Never use the alcove berth without setting up the safety

mesh.

• Never leave children unminded in the alcove berth.

• Before driving, the alcove bed must be in its storage

position and locked.

• Ensure that the lights attached underneath the alcove

berth are turned off.

Содержание FIAT Premium Drive












































































































































































































Результаты поиска

Содержание FIAT Premium Drive

Отзывы:

Похожие инструкции для FIAT Premium Drive

Бренды по названию

Популярные бренды

Hobby FIAT Premium Drive, Руководство пользователя

Результаты поиска

Содержание FIAT Premium Drive

Отзывы:

Похожие инструкции для FIAT Premium Drive

Бренды по названию

Популярные бренды