Hobby FIAT Premium Drive Скачать руководство пользователя страница 23

Страница: 23 / 203

Chassis

03-5

3.4 Levelling supports

The levelling supports are located in the rear area by the
frame extension.

Swinging out the levelling supports

• Place the crank on the hexagon head

• Turn the crank to move the support to a vertical position.
• If necessary, secure the foot

to prevent it from sinking

into the ground and place it on a firm base.

• If the levelling support is in a vertical position, the support

foot will extend telescopically.

• Use the crank to level the levelling supports until the vehi

cle stands level.

Retracting levelling supports

• Use crank to release levelling supports.
• Continue to crank smoothly until the levelling support is once

again in its initial horizontal position.

- Do not use the levelling supports as a car jack. Their sole

purpose is to stabilise the motor home when it is parked.

- Always load the levelling supports evenly (max. 500 kg per

support).

- Always retract the levelling supports and secure them

before driving.

- Clean the levelling supports regularly and grease them slightly.

The telescopically adjustable foot may only be extended

as far as the yellow marking!

Содержание FIAT Premium Drive












































































































































































































Результаты поиска

Содержание FIAT Premium Drive

Отзывы:

Похожие инструкции для FIAT Premium Drive

Бренды по названию

Популярные бренды

Hobby FIAT Premium Drive, Руководство пользователя

Результаты поиска

Содержание FIAT Premium Drive

Отзывы:

Похожие инструкции для FIAT Premium Drive

Бренды по названию

Популярные бренды